Ink drawings not yet Resined

6.25 x 7.5 "

8.5 x 11 "

Purse Painting Mash-up

When I started making these bags a couple years ago, my original intent was to sew real, original miniature paintings onto the front. However, sewing is not my cup of tea. I enjoy the end result, but definitely NOT the process. It's the opposite with art; I heartily enjoy the process and usually end up ignoring the end result.
I almost always forget to sign my paintings. Once it's done, I just don't care anymore. I think I really just wanted to see what the painting was going to be, like reading a story to find out what happens.
Anyway, here is what happens when you mix a purse with a painting.

Three more ink drawings resined

Here is the piece from the tutorial. It's still not completely cured, but it can be moved around.

Here are two more pieces that I resined at the same time.

Epoxy Resin

So it's actually *epoxy* resin. I've been saying poly resin which is different stuff, apparently.
Here is the painting I want to epoxy resin. It's ink on bristol board.
The painting was sprayed with Krylon UV resistant clear acrylic coating, (no photo) and allowed to dry.

Next, I painted the edges and sides of a 12 x 12 box canvas black (the chosen border color). Once the canvas was dry, I used Golden brand gel gloss medium to fix the painting to the canvas.

A layer goes on the canvas and on the back of the painting.

I used this handy dandy tool to smooth the painting onto the canvas. I think I used it originally in a print-making class many years ago. I don't remember what it's called or where to get it. A plastic putty knife would work just as well. I will use that later for the resin.

I smoothed the front and the backside of the canvas.

Then I put a heavy pile of books on top of the upside down canvas, so that the painting will dry very flat.

So, here's the cast of characters for the next part: epoxy resin (it comes in two parts the resin, and the hardener), a disposable stirring spoon and bowl, protective gloves, and the putty knife (not pictured).

Also, make sure the place you are working is well ventilated. Epoxy resin doesn't really have a strong odor, but it still isn't safe to breathe. It's too humid to work outside now so my system is a fan on the resined pieces pointing towards a fan that is in the window.

Also, wear a mask. AND if you have long hair, tie it up.

Mix equal parts resin and hardener. This is important. If the ratio isn't 1:1 the resin won't harden right. Mix thoroughly.

Pour it on the piece. Be careful not to resin your piece to the floor. Resin will bind just about anything together. I once had to knock a piece off my basement floor with a hammer and screw-driver.

Spread it around making sure everything is covered. I also used the mixing spoon or a disposable paint brush to smooth the resin around the edges of the box.

Every 10 minutes or so, use a blow dryer to pop any bubbles that form on the surface. If you skip this step, your piece will have permanent micro-bubbles.

Let it dry. It will be hard to the touch in about 8 hours. Make sure no one disturbs it during the time. If the place it's drying isn't exactly pristine (like a garage maybe), you might need to protect your piece from dust or bugs with a carboard box.

It will be completely cured in maybe 3 days. Resin self levels, so there is no need to fuss over it, with the exception of the micro-bubbles.

Second Resin attempt

I'm in the process of putting all my old ink drawings on canvas or wood and applying a layer of resin. This is a convenient way to finish them. They are ready for display as soon as the layer of resin is hard.
I had never really wanted to place all these drawings under glass and in frames. It seemed kind of stuffy to me, adding such a hard barrier between the drawings and the viewer. They're meant to be looked at closely. There is a lot of detail.
Resin has the advantages of being permanent, cheaper than traditional frames, and giving the viewer the feeling of more immediate access to the work.

Here is the latest resined piece:

12x16 drawing on 16x20 canvas

Additionallly, these resined pieces could still be framed if someone wished. They don't need glass, as the resin acts as a sturdy barrier against the elements and oily fingers.
As with any painting, resined pieces should still be protected from sunlight.

My next post, hopefully, will be a play by play of the process, using this piece:

Ink drawing Poly Resined on Canvas

This project started off as an ink drawing on watercolor paper.
I sprayed the drawing with a matte glaze to fix the inks, then I used gel gloss medium to glue the drawing to a prepped canvas. When all was dry, I poured poly resin over the whole.

Lessons learned:
1. apply several coats of fixative. The poly resin still picked up a slight orange color from the ink.
2. make sure the corners of the drawing are firmly glued down BEFORE pouring the poly resin. I was lazy and thought the poly resin would glue them down better. Not. They still curled up slightly despite the resin. I'll need to go back and fix that.

3. Photograph the work BEFORE finishing with the resin.

As you can see from this photo, the resin is very shiny, making it hard to photograph the work and get a good representation. The colors are much more saturated than shown here, and a lot of detail (especially in the corners) is washed out.

8x10

Old work made new and a Commission

These were painted in 2005. They had been in storage until 2009. When we moved I decided to hang them in the house, and they have been exposed to sunlight during that time, but haven't faded noticeably. I varnished them today with one coat of permanent Liquitex Gloss Varish. The varnish retains a wet look after drying, which causes the paint to look as saturated as it did when first applied.

23.75" x 48.5"

30x35

This painting was an experiment with acrylic, watercolor pencils, and ink on wood. I sprayed the final painting with a fixative to prevent the ink from bleeding, and then I applied a layer of poly resin. The resin gives the painting a thick glass like coating. I really like the effect.

24x25

This painting was done in ink and acrylic and various texturing mediums, sealed with a coat of Gloss Varnish.

36x48

New Blog

I intend to keep a record of my paintings here.